 |
|
|
| |
| FIRST COMPONENTS SPARE PARTS |
|
| BOTTOM BRACKET PARTS |
|
| BB BEARINGS |
| Standard machine bearings for various First Components BBs. |
| $19.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| CERAMIC BEARINGS |
| Hybrid ceramic bearings designed for First Compnents BBs. |
| $XX.XXUS* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| BB30 BEARINGS |
| |
| $25.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| BB30 C-CLIPS |
| A standard C-Clip for BB30 frames. |
| $5.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| BB30 WAVY WASHER |
| A standard wavy washer for various BB30, PF30, BBRight etc. |
| These are NOT designed to be used with Campagnolo Ultra-Torque cranksets. |
| $4.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| CRANKSET PARTS |
|
| CHAINRINGS |
| Chainrings from FIRST COMPONENTS are machined from 7075 alloy so they are stiff and long loasting. |
| They have all the shift ramps and tooth profiles needed to ensure fast and accurate shifting under load. |
| They are available for 130mm BCD standard road cranks, 110mm BCD compact road cranks and 104mm/64mm MTB cranksets which means they are compatible with most other cranksets on the market. |
|
 |
BCD: |
130mm |
MATERIAL: |
7075 ALLOY |
OUTER CHAINRING: |
55T, 53T, 50T |
| INNER CHAINRING: |
42T, 39T |
| CHAINRING THICKNESS: |
INNER |
OUTER |
| |
3mm |
4mm |
|
| OUTER |
INNER |
| $39.99US* |
$19.99US* |
|
|
| * Plus $5.00US Shipping |
|
|
 |
BCD: |
110mm |
MATERIAL: |
7075 ALLOY |
OUTER CHAINRING: |
50T |
| INNER CHAINRING: |
34T |
| CHAINRING THICKNESS: |
INNER |
OUTER |
| |
3mm |
4mm |
|
| OUTER |
INNER |
| $34.99US* |
$14.99US* |
|
|
| * Plus $5.00US Shipping |
|
|
 |
BCD: |
104mm/64mm |
MATERIAL: |
7075 ALLOY |
OUTER CHAINRING: |
42T |
| INNER CHAINRING: |
32T |
| GRANNY GEAR: |
22T |
| CHAINRING THICKNESS: |
INNER |
OUTER |
| |
3mm |
4mm |
|
| OUTER |
INNER |
GRANNY |
| $34.99US* |
$14.99US* |
$14.99US* |
| OUT OF STOCK |
OUT OF STOCK |
OUT OF STOCK |
| * Plus $5.00US Shipping |
|
|
|
| ALLOY CHAINRING BOLTS |
| Not much to say here. A standard set of alloy chainring bolts that will fit pretty much and double crankset on the market with the exception of hidden chainrings. |
| They are sold as a set of 5pc front (5mm allen key) and 5 pc rear. |
| Available only in SILVER. |
| $12.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| CRANK BOLTS (set) |
| Everyone looses one of these every now and then. |
| These are basic cap steel chainring bolts that will fit a wide variety of cranksets. |
| They are available in 12mm and 15mm sizes. |
| $9.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
 |
|
|
| Ti CRANK BOLTS (set) |
| These are M15 Titanium crankset bolts that will fit a variety of cranksets on the market. |
| It's an easy way to shave a few grams. |
| BDop Cycling recommends installing the cranks and torqueing them to spec using regular cap steel bolts and then replacing those bolts with the Titanium bolts (and retorqueing to spec). |
| $39.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
| |
| WAVY WASHER |
| A standard wavy washer for various BB30, PF30, BBRight etc. |
| These are NOT designed to be used with Campagnolo Ultra-Torque cranksets. |
| $4.99US* |
| |
| * Plus $3.00US Shipping |
|
|
|
|
| HEADSET PARTS |
|
| COMPRESSION PLUG (for carbon steerers) |
| |
| BDop COMPRESSION PLUG |
| expander bolts |
| The BDOP COMPRESSION PLUG is designed specifically for forks with carbon steerers. |
| It extends 18mm into the steerer tube providing a large contact area. |
| The BDOP COMPRESSION PLUG is knurled where it comes into contact with the carbon steerer to give plenty of grip but leaving the carbon undamaged. |
| It comes with a black, alloy top cap without ANY logos for a clean, uncluttered look. |
| Weight: 42g |
| $11.99US* |
|
|
| * plus $3.00US shipping |
|
 |
|
|
| STAR FANGLED NUT |
| with Top Cap |
| This is a basic Star Fangled nut with cap steel bolt and alloy top cap. |
| The part is designed for ALLOY STEERER TUBES ONLY in 1 1/8:" size. |
| $5.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| CARBON SPACERS |
| Carbon headset spacers add a more subtle look that their alloy counterparts. |
| These are finished in 3k weave and without logos. |
| They are available in 2mm, 3mm, 5mm, 15mm and 20mm hieghts. |
| $1.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
|
| ALLOY SPACERS |
| Alloy spacers with a knurled surface. Alloy spacers won't compress over time like carbon can and there are no worries about solvents or grime. |
| There are anodized in black, blue, red or yellow. |
| The spacers come in 5mm, 10mm and 15mm hieghts. |
| $1.99US* |
| |
| * Plus $3.00US Shipping |
|
 |
|
| |
|
|
|
|
|
|
|
|
|
Outdoor sports gear |
| Copyright 2008~2012 BDop Cycling Company Ltd. |
