Frame-Parts and Accessories

When you buy a new frame very often there are several small parts that are either not included with your new frame of that you need to upgrade or replace from your old frame.

Most of the small parts you need to get your new bike rolling can be found here. We will continue to add new small parts as we come across them and after we've given them a go for ourselves.

BOTTOM BRACKETS
Due to the proliferation of BB standards we have a separate page devoted to all your BB needs. Please follow the links below:
External Cups 68/73mm	External Cups 83mm	Press Fit 30	BB30
Press Fit - 86.5mm / 92mm

BDop BB30 ADAPTOR

Why be limited by your choice of frame because of your existing crankset?

The BDop BB30 Adaptor is designed for BB30 frames. It allows you to continue to use your existing crankset on a BB30 frame.

The BDop BB30 Adaptor uses Japanese bearings that are pressed into your BB30 frame the same way as a normal BB30 set-up.

The alloy cups are then slid in by hand reducing the axle diameter from 30mm to Shimano, Sram, FSA or Campagnolo compatible sizes.

The BDop BB30 Adaptor comes with two Japanese bearings, two C-Clips, two wavy washers and two alloy step-down cups.

$34.99*

* plus $5.00US shipping

COMPATIBILTY CHART
The following cranksets are compatible with the BDop BB30 Adapters
SHIMANO	SRAM	COMPAGNOLO	FSA
ALL HOLLOWTECH II:	ALL GXP EXTERNAL BSA:	ALL MODELS:	ALL MEGAEXO:
DA 10spd	RED	ULTRA-TORQUE	K-FORCE LIGHT
ULTEGRA 10spd	FORCE		SL-K LIGHT
105 10spd	RIVAL		OMEGA
TIAGRA 10spd			ENERGY
			GOSSAMER

BDop BARREL ADJUSTERS

COMING SOON

Deda Dog FangBDOP SHARK TOOTHDeda Dog Fang

The BDop Shark Tooth is a tried and true product that is designed for frames with round seat tubes.

Simply attach the BDop Shark Tooth to your frame below the front derailleur so that it reaches out and almost touches your small chainring.

The next time you drop your chain the BDop Shark Tooth will catch it and stop the chain from falling onto your frame and possibly getting wedged between the crank and the frame, damaging your paint or gouging your carbon fiber.

Available in 31.8 or 34.9

$5.99*

* plus $3.00US shipping

BDOP SHARK TOOTH IN USE

BDOP CHAIN FALL DEVICE

We've been testing the BDop Chain Fall Device for several months now and are satisfied that it can do the job.

The BDop Chain Fall Device is made from quality alloy and comes only in black.

It is designed to attach where the front derailleur mounts to the hanger. It works for all frame shapes and sizes.

The BDop Chain Fall Device includes 3 lengths of derailleur fixing bolts, a curved washer and a 3mm spacer allowing it to be mounted on any frame with any brand of derailleur.

Please note: There are two versions. One version is for standard and compact road bike cranksets and the other is for Cyclo-Cross cranksets.

Weight: 12g

$14.99US*

* plus $5.00US shipping

BDOP CHAIN FALL DEVICE IN USE

COMPRESSION PLUG (for carbon steerers)

The BDOP COMPRESSION PLUG is designed specifically for forks with carbon steerers. We've been using them for 2 seasons of racing without a single problem

The BDOP COMPRESSION PLUG extends 18mm into the steerer tube providing a large contact area.

The contact area lines up with where the stem clamps to the fork so that even if you do over-torque the stem bolts a bit you are far less likely to damage your carbon steerer tube.

The BDOP COMPRESSION PLUG is knurled where it comes into contact with the carbon steerer to give plenty of grip but leaving the carbon undamaged.

It comes with a black, alloy top cap without ANY logos for a clean, uncluttered look.

Weight: 42g

$11.99US*

* plus $5.00US shipping

BDop FRONT DERAILLEUR CLAMP (for Carbon Frames)

The BDOP DERAILLEUR CLAMP is machined from aluminium and is designed specifically to clamp on carbon tubes.

The pivot and clamping points have a machined radius so they won't concentrate pressure at very narrow points in the frame which can lead to cracks.

The BDOP DERAILLEUR CLAMP is available in 31.8 and 34.9 sizes and comes only in black.

Weight: 26g

$11.99US*