 |
|
| |
| |
| BDOP ARM WARMERS |
| BDOP ARM WARMERS |
| BDop Arm Warmers are made of a light weight wicking fabric. |
| They have a wide gripper at the upper arm and a comfortable cuff at the sleeve. |
| The underside of the BDop Arm Warmers feature a mesh section to allow additional breathability. |
| The BDop Arm Warmers are designed for cool spring time or fall conditions. They're good for warming up for an early morning start and light enough to be tucked into a jersey pocket once things warm up. |
| The BDop Arm Warmers are also perfect for shaving those last few seconds off of your TT time. |
| The BDop Arm Warmers are available ONLY in white. |
| $19.99US* |
|
| * plus $5.00US shipping |
| Custom orders welcome! |
|
 |
| SIZING |
| There are 3 measurements for the BDop Arm Warmers: |
| 1. The overall length from the cuff to the top of the arm warmer. |
| 2. 1/2 of the cuff width while the elastic is relaxed. |
| 3. 1/2 of the arm width while the elastic is relaxed. |
| NOTE: ALL sizing is measured in inches. |
| |
SM |
MED |
LG |
XL |
2XL |
| LENGTH (inch): |
14 1/2" |
15" |
15 1/2" |
15 7/8" |
16 5/8 " |
| 1/2 CUFF WIDTH |
2 1/2" |
2 3/4" |
3" |
3 1/4" |
3 1/2" |
| 1/2 ARM WIDTH |
4 1/2" |
4 3/4" |
5" |
5 1/2" |
5 3/4" |
|
|
| WRIST GRIPPER |
ARM GRIPPER |
 |
 |
|
|
| |
| PILLAR SPOKE TENSION GAUGE |
 |
| Proper spoke tension and balancing are crucial in any wheel build. This can only be acheived using a spoke tension gauge. |
 |
| The Pillar Spoke Tension Gauge comes in a sturdy case and includes: |
| 1. Spoke Tension Gauge |
| 2. Spoke keys (2 sizes) |
| 3. Aero Spoke Holder |
| 4. Spoke Ruler |
| 5. Tools to service the Spoke Gauge |
| $369.99 |
|
|
| *Plus $25.00US Shipping via EMS |
|
|
| |
|
COMPRESSION PLUG (for
carbon steerers) |
| |
| BDop
Compression Plug |
| expander
bolts |
| The BDOP COMPRESSION
PLUG is designed specifically for forks with carbon
steerers. |
| It extends 18mm into
the steerer tube providing a large contact area. |
| The BDOP COMPRESSION
PLUG is knurled where it comes into contact with
the carbon steerer to give plenty of grip but leaving the
carbon undamaged. |
| It comes with a black,
alloy top cap without ANY logos for a clean, uncluttered look. |
| Weight: 42g |
| $11.99US* |
|
|
| * plus
$5.00US shipping |
|
 |
|
| |
| BDOP CHAIN FALL DEVICE |
| The BDop Chain Fall Device protects your frame from damage if your chain drops off to the inside. |
| The BDop Chain Fall Device is made from quality alloy and comes only in black. |
| It is designed to attach where the front derailleur mounts to the hanger. It works for all frame shapes and sizes. |
| The BDop Chain Fall Device includes 3 lengths of derailleur fixing bolts, a curved washer and a 3mm spacer allowing it to be mounted on any frame with any brand of derailleur. |
| Please note: There are two versions. One version is for standard cranksets and the other is for compact cranksets. |
| Weight: 12g |
| $14.99US* |
|
|
| * plus $5.00US shipping |
|
 |
|
| BDOP CHAIN FALL DEVICE IN USE i |
 |
| BDOP CHAIN FALL DEVICE |
| The BDop Chain Fall Device comes with all the mounting hardware so it can be adapted to various front derailleurs and mounting brackets. |
| For this mount we had to use the curved washer and a longer fixing bolt (all provided). |
| The BDOP Chain Fall Device runs parallel to the chainring and has a small hook on the bottom so the chain can't slip off and get jammed between the bottom bracket and crankset causing damage to the paint and possibly your frame. |
| You can see here how close it can be set up so that the chain simply has no where to go. |
| Adding the BDop Chain Fall Device hasn't affected shifting performance and has so far been completely unnoticed. It's just waiting for its chance to catch a dropped chain and earn its keep. |
|
|
| |
|
|
|
|
|
|
|
|
| |
| Copyright 2008~2012 BDop Cycling Company Ltd. |
