Wheels-Tubulars

The X-PERTI W285 wheels are a one piece carbon with new 3D construction. The 3D sections are raised from the surface of the rim sidewall to increase aerodynamic efficiency.

The X-PERTI W285 wheels are handbuilt. They are built using the most durable and aero spokes on the market: SAPIM CX-RAY.

For more information see: SAPIM CX-RAY

They come with carbon specific brake pads for Shimano© or Campagnolo© brake holders (based on freehub configuration).

The X-PERTI W285 wheels use a 3 in 1 freehub system which means the freehub can be swapped out between Shimano© 8/9/10 spd, Campagnolo© 9/10/11 and Sram© using two 5mm allen keys and a 17mm wrench in a matter of minutes.

For more information see: 3-IN-1 Unique

For service instructions see: Hub Service

X-PERTI W285 SPECS

Description:

Carbon 3D Tubular

Rim Profile:

85mm

Weight:

Pair:1792g [Shim.10]

Front:772g Rear:1020g

QR:

Front:54g Rear:60g Pair: 114g

Spokes:

Sapim CX-Ray , J-Hook

Nipples:

Sapim S.I.L.S - Polyax, Hidden

12mm Brass

Lacing:

Front: 20 spokes - Radial

Rear: DS 8 spokes, 2 Cross

Rear: NDS 8 spokes, Radial

Hubs:

Aluminum/Carbon

Axles:

Front: Aluminum

Rear: Aluminum

Freehub:

3IN1Unique

Freehub Mat'l

Alloy [E Type]

Bearings:

Front: 2 Japanese EZO sealed bearings

Rear: 4 Japanese EZO sealed bearings

+ 1 needle bearing


MORE INFO	MORE INFO	MORE INFO	MORE INFO

NOVATEC X-PERTI W285

$1380.00 USD

Team/Group discounts available

CLYDE RATING::
As a Clyde you should expect a slight drop in spoke tension (5%-10%) overall in the first 500-1000km. After the spokes are readjusted there should be no further change. Braking performance could be an issue under some conditions.

NOVATEC X-PERTI W350

X-PERTI W350

The X-PERTI W350 wheels are handbuilt. They are built using the most durable and aero spokes on the market: SAPIM CX-RAY.

For more information see: SAPIM CX-RAY

The X-PERTI W350 wheels use a one piece carbon rim. The hub shells are aluminum with a carbon wrap. They come with carbon specific brake pads for Shimano© or Campagnolo© brake holders (based on freehub configuration).

The X-PERTI W350 wheels use a 3 in 1 freehub system which means the freehub can be swapped out between Shimano© 8/9/10 spd, Campagnolo© 9/10/11 and Sram© using two 5mm allen keys and a 17mm wrench in a matter of minutes.

For more information see: 3-IN-1 Unique

These wheels have been ridden and raced under the harshest conditions and have stood up exceedingly well.

For service instructions see: Hub Service

X-PERTI W350 SPECS

Description:

Carbon Tubular

Rim Profile:

50mm

Weight:

Pair:1418g [Shim.10]

Front:606g Rear:812g

QR:

Front:54g Rear:60g Pair: 114g

Spokes:

Sapim CX-Ray , Straight Pull

Nipples:

Sapim S.I.L.S - Hidden 12mm Brass

Lacing:

Front: 20 spokes - Radial

Rear: DS 16 spokes, 2 Cross

Rear: NDS 8 spokes, Radial

Hubs:

Aluminum/Carbon wrap

Axles:

Front: Aluminum

Rear: Aluminum

Freehub:

3IN1Unique

Freehub Mat'l

Alloy [D Type]

Bearings:

Front: 2 Japanese EZO sealed bearings

Rear: 4 Japanese EZO sealed bearings


MORE INFO	MORE INFO	MORE INFO	MORE INFO	MORE INFO

NOVATEC X-PERTI W350

$1,350.00 USD

Team/Group discounts available

CLYDE RATING::
As a Clyde you should expect a slight drop in spoke tension (5%-10%) overall in the first 500-1000km. After the spokes are readjusted there should be no further change. Braking performance could be an issue under some conditions.

NOVATEC X-PERTI W150

X-PERTI W150

The X-PERTI W150 wheels are handbuilt. They are built using the most durable and aero spokes on the market: SAPIM CX-RAY.

For more information see: SAPIM CX-RAY

The X-PERTI W150 wheels use a one piece carbon rim. The hub shells are aluminum with a carbon wrap. They come with carbon specific brake pads for Shimano© or Campagnolo© brake holders (based on freehub configuration).

The X-PERTI W150 wheels use a 3 in 1 freehub system which means the freehub can be swapped out between Shimano© 8/9/10 spd, Campagnolo© 9/10/11 and Sram© using two 5mm allen keys and a 17mm wrench in a matter of minutes.

For more information see: 3-IN-1 Unique

For service instructions see: Hub Service

X-PERTI W150 SPECS

Description:

Carbon Tubular

Rim Profile:

50mm

Weight:

Pair:1426g [Shim.10]

Front:609g Rear:817g

QR:

Front:54g Rear:60g Pair: 114g

Spokes:

Sapim CX-Ray , Straight Pull

Nipples:

Sapim S.I.L.S - Hidden 12mm Brass

Lacing:

Front: 20 spokes - Radial

Rear: DS 16 spokes, 2 Cross

Rear: NDS 8 spokes, Radial

Hubs:

Aluminum/Carbon wrap

Axles:

Front: Aluminum

Rear: Aluminum

Freehub:

3IN1Unique

Freehub Mat'l

Alloy [D Type]

Bearings:

Front: 2 Japanese EZO sealed bearings

Rear: 4 Japanese EZO sealed bearings


MORE INFO	MORE INFO	MORE INFO	MORE INFO	MORE INFO

NOVATEC X-PERTI W150

$1300.00 USD

Team/Group discounts available

CLYDE RATING::
As a Clyde you should expect a slight drop in spoke tension (5%-10%) overall in the first 500-1000km. After the spokes are readjusted there should be no further change. Braking performance could be an issue under some conditions.

NOVATEC X-PERTI W238

X-PERTI W238

The X-PERT I W238 wheels are handbuilt. They are built using the most durable and aero spokes on the market: SAPIM CX-RAY.

For more information see: SAPIM CX-RAY

TheX-PERT I W238 wheels use a one piece carbon rim. The hub shells are aluminum with a carbon wrap. They come with carbon specific brake pads for Shimano© or Campagnolo© brake holders (based on freehub configuration).

The X-PERT I W238 wheels use a 3 in 1 freehub system which means the freehub can be swapped out between Shimano© 8/9/10 spd, Campagnolo© 9/10/11 and Sram© using two 5mm allen keys and a 17mm wrench in a matter of minutes.

For more information see:3-IN-1 Unique

For service instructions see: Hub Service

X-PERTI W238 SPECS

Description:

Carbon Tubular

Rim Profile:

38mm

Weight:

Pair:1405g [Shim.10]

Front:587g Rear:818g

QR:

Front:54g Rear:60g Pair: 114g

Spokes:

Sapim CX-Ray , J-Hook

Nipples:

Sapim S.I.L.S - Hidden 12mm Brass

Lacing:

Front: 20 spokes - Radial

Rear: DS 16 spokes, 2 Cross

Rear: NDS 8 spokes, Radial

Hubs:

Aluminum/Carbon wrap

Axles:

Front: Aluminum

Rear: Aluminum

Freehub:

3IN1Unique

Freehub Mat'l

Alloy [E Type]

Bearings:

Front: 2 Japanese EZO sealed bearings

Rear: 4 Japanese EZO sealed bearings

+ 1 needle bearing


MORE INFO	MORE INFO	MORE INFO	MORE INFO

NOVATEC X-PERTI W238

$1250.00 USD

Team/Group discounts available

CLYDE RATING::
As a Clyde these might not be the beast wheels for you. We'd suggest the a deeper section rim like the X-PERTI W150.

NOVATEC X-PERTI W319

X-PERTI W319

The X-PERTI W319 wheels are handbuilt. They are built using SAPIM LASER DB spokes.

For more information see: SAPIM CX-RAY

TheX-PERTI W319 wheels use a one piece carbon rim. The hub shells are aluminum with a carbon wrap. They come with carbon specific brake pads for Shimano© or Campagnolo© brake holders (based on freehub configuration).

The X-PERTI W319 wheels use a 3 in 1 freehub system which means the freehub can be swapped out between Shimano© 8/9/10 spd, Campagnolo© 9/10/11 and Sram© using two 5mm allen keys and a 17mm wrench in a matter of minutes.

For more information see: 3-IN-1

For service instructions see: Hub Service

X-PERTI W319 SPECS

Description:

Carbon Tubular

Rim Profile:

19mm

Weight:

Pair:1334g [Shim.10]

Front:577g Rear:757g

QR:

Front:54g Rear:60g Pair: 114g